Federal Signal Global Serie Consignes D'installation Et De Maintenance page 9

Mounting the Surface-Mount Ex d Sounder
Mount the sounder to a flat surface using the four 8.5 mm mounting holes.
Use installer-supplied fasteners suitable for the surface to which the device
will be mounted.
2X M20 GLAND ENTRIES
Figure 3 Front view of Ex d sounder
105.9 mm
(4.17 in
Mounting the Ex d e Surface-Mount Sounder
Mount the sounder to a flat surface using the six 8.5 mm mounting holes. Use
installer-supplied fasteners suitable for the surface to which the device will be
mounted.
Installation and Maintenance Instructions
Figure 2 Side view of Ex d sounder
190.6 mm
(7.50 in)
Ø133.8 mm (5.27 in)
105.9 mm
)
(4.17 in
Model G-SND Global Series Sounder
132.6 mm
(5.22 in)
34.9 mm
(1.38 in)
4X COUNTER-BORED
HOLES TO FIT M8
SOCKET-HEAD
CAP SCREWS
9