Federal Signal Global Serie Consignes D'installation Et De Maintenance page 25

Installation and Maintenance Instructions
The units can be mounted on a wall or ceiling and have no mounting orientation
restriction. For specific installation and wiring requirements, refer to local codes
such as the National Code (NFPA70) and the National Fire Alarm and Signaling
Code (NFPA72).
Figure 9 Dispersion characteristics for audible signal devices
AUDIBLE SIGNAL DEVICE
3 m 3 m
º
20
º
50
6 dB 6 dB
3 dB 3 dB
99 dB
Do not paint this device after installation and do not change the factory-
applied finish.
Getting Technical Support and Service
The Federal Signal factory provides technical assistance with any problems
that cannot be handled locally. Any units returned to Federal Signal for service,
inspection, or repair must be accompanied by a Return Material Authorization
(RMA). Obtain a RMA from a local Distributor or Manufacturer's Representative.
Please provide a brief explanation of the service requested, or the nature of the
malfunction.
For technical support and service, visit:
signaling.fedsig.com/technical-support
signaling.fedsig.com/service-center
Model G-SND Global Series Sounder
25