Federal Signal Global Serie Consignes D'installation Et De Maintenance page 7

Installation and Maintenance Instructions
cULus Zone Certifications:
This equipment is for use in Class I, Zone 1 and Zone 21 hazardous (classified)
locations. It has been investigated with reference to risks to life and property and
for conformity to the installation and use in provisions of Articles 505 and 506 of
NFPA 70 (NEC).
These models use protections:
Class I, Zone 1, AEx db IIC T4 Gb or AEx db eb IIC T4 Gb
Zone 21, AEx tb IIIC T135°C Db IP66 (Tamb= -55°C to+70°C)
Ex db IIC T4 Gb or Ex db eb IIC T4 Gb
Ex tb IIIC T135°C Db IP66 (Tamb= -55°C to+70°C)
UL Fire Alarm Certifications: See page 30.
Unpacking the Sounder
After unpacking the sounder, examine it for damage that may have occurred in
transit. If it has been damaged, do not attempt to install or operate it. File a claim
immediately with the carrier, stating the extent of the damage. Carefully check
all envelopes, shipping labels, and tags before removing or discarding them.
Disposal of all shipping materials must be carried out in accordance with national
and local codes and standards. If any parts are missing, please call Federal Signal
Customer Support at +1 708-534-4756 or +1 877-289-3246.
Creating Combination Fixtures in the Field
The Federal Signal Global Series Ex de products can be connected together
in the field using interchangeable E-box end caps and a proprietary coupling
system (Figure 1).
Model G-SND Global Series Sounder
7