SilverCrest SURQ 4 A1 Mode D'emploi page 59

10.11.5Manually tuning a station
As well as the automatic station search, in FM radio mode you can also tune in a station manually.
This makes it possible to find even weaker stations. Proceed as follows:
•
Briefly press the [ ] (4) or [
(0.05 MHz).
•
When the end of the frequency band is reached, the search continues at the other end.
10.11.6Toggling stereo/mono
Press and hold the button [EQ/ST-MO] for about 2 seconds to toggle playback between "Stereo"
and "Mono". "Stereo" or "Mono" is briefly shown on the display (1). If you have selected "Stereo"
and a station is received in stereo, then the ((ST)) symbol (26) is shown on the display (1).
Change the setting to "Mono" to reduce noise on weak stations.
10.12 Bluetooth
®
Via Bluetooth , you can pair a Bluetooth
player) with the radio. After pairing, you can play the music on the radio and control basic player
functions remotely using the buttons on the radio.
Proceed as follows to pair the radio with your mobile phone or player:
•
When the radio is switched on, press the [
on the display (1).
•
"PAIRING" flashes on the bottom edge of the display (1) and pairing mode is active for approx.
15 minutes. If no device is paired during this time, the radio switches off.
•
Now pair your mobile phone or music player to the radio via Bluetooth
operating instructions of your mobile phone. From the list of devices found, select "SURQ 4 A1"
and establish the connection. If you are prompted to enter a PIN, use "0000".
•
The radio beeps to confirm the pairing and "CONNECT" is shown on the display (1).
•
You can now start playback from your Bluetooth
When it is switched on, the radio automatically reconnects to the last-paired Bluetooth
device. To pair the radio with a different Bluetooth
the existing connection from your mobile phone. Please read the operating instructions of
your mobile phone. The radio is then in pairing mode.
] (8) button to increase or reduce the frequency by one step
®
®
-compatible music player (such as a smartphone or MP3
] button (13) several times until [ ] (35) is shown
®
device. The radio starts playing the audio.
®
device, you first need to disconnect
SilverCrest SURQ 4 A1
®
. Please read the
English - 57
®