SilverCrest SLM 5 B1 Mode D'emploi page 47

9.3 TWS mode
By purchasing a second speaker of the same type (SLM 5 B1), it is
possible to pair both speakers and use them as a stereo speaker system.
A second speaker can be purchased at www.lidl.de/de/onlineshop [in
German].
TWS: 'True Wireless Stereo'.
This function allows two speakers to be coupled.
The left speaker acts as the main speaker, which is connected
to a Bluetooth
receives to the second (right) speaker.
9.3.1 Activate TWS mode
A speaker must not be connected to a Bluetooth
when TWS mode is activated. If necessary, disconnect any
existing connection.
•
Switch on both speakers and select which speaker should act as the
left speaker (main speaker).
•
Press the
the TWS LED (7) will flash green rapidly during pairing.
•
Now, briefly press the (5) button on the other (right) speaker.
•
A beep indicates the coupling was successful. TWS mode is now
active.
•
The TWS LED (7) will light up green on both speakers.
The two speakers will switch off automatically after about 6
minutes if no connection is made within that time. The
coupling process must be restarted after switching the
®
device . It transmits the audio signals it
(6) button on the left speaker. A beep will sound and
SilverCrest SLM 5 B1
®
device
English - 45