SilverCrest SLM 5 B1 Mode D'emploi page 45

9.2 Pair with a Bluetooth
The AUX IN socket (9) must not be used during the coupling
process.
The Bluetooth
Enter '0000' if you are asked for a PIN during the pairing
process. The connection may take a long time to establish,
depending on the device used.
•
Set your Bluetooth
available Bluetooth
instructions of your Bluetooth
•
Briefly press the on/off button
power/charging LED (12) will flash brightly twice, a series of beeps
will sound and then the power/charge LED (12) will flash blue
rapidly. Coupling mode is now active.
•
Select device SLM 5 B1 from the list of found devices to pair the
two devices. A series of beeps will sound and the power/charge
LED (12) will flash blue twice every 3 seconds once the connection
is successful.
•
Now, start playback on your Bluetooth
the connected speaker.
•
Hold down the on/off button
end the Bluetooth connection
power/charge LED (12) will flash twice and then switch off.
9.2.1 Connect speaker to another Bluetooth
To connect the currently connected speaker to another Bluetooth
device, the existing connection must first be disconnected by pressing the
®
device
®
device name of the speaker is SLM 5 B1.
®
device, such as your smartphone, to search for
®
devices nearby. Please consult the operating
®
device.
(1) for approximately 3 seconds to
®
. A beep will sound and the
SilverCrest SLM 5 B1
(1) to switch the speaker on. The
®
device. Playback occurs via
®
device
English - 43
®