SilverCrest SSMS 600 E2 Instructions D'utilisation Et Consignes De Sécurité page 11

mDANGER! Danger of
scalding! Do not use the
containers with boiling liquids
or hot grease .
If you notice any smoke or
unusual noises, immediately
disconnect the product from
the power supply . Have the
product checked by a specialist
before continued use .
Always operate the product
on an even, stable and clean
surface .
Always disconnect the
appliance from the power
supply if it is left unattended
and before assembling,
disassembling or cleaning .
mWARNING: Switch off the
appliance and disconnect from
power supply before changing
accessories or approaching
parts that move in use .
No action is needed from users
to shift the product between 50
and 60 Hz . The product adapts
itself for both 50 and 60 Hz .
10 GB/IE/NI
Cleaning and storage
The drive unit
holder shall not be exposed
[ 13 ]
to any dripping or splashing
water .
Refer to the "Cleaning and
care" section for instructions on
how to clean the product .
˜ Before first use
Remove all the packaging materials .
Clean the product (see "Cleaning and care") .
˜ Operation
˜ Assembling accessories
(ill . B)
Put the desired accessory (
the drive unit .
[ 15 ]
on the accessory has to align with
the drive unit .
Turn the accessory until
Dismount all the accessories in reverse order .
˜ Turning the product on/off
m
WARNING: The product has an initial
rotary impulse . Hold the product firmly during
operation .
and the whisk
15 ] [
or ) on
6 ] [ 13 ] [ 14 ] [
on
aligns with .