Festo DNCV Série Notice D'utilisation page 21

DNCV-...
4 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the conditions of use specified in this chapter are always
fulfilled.
The product will then function correctly and safely.
Compare the maximum values in these operating instructions with your actual
S
application (e.g. pressures, forces, torques, temperatures).
The product can only be operated in ac-
cordance with the relevant safety guide-
lines if the maximum loading limits are
observed.
Make sure there is a supply of correctly
S
prepared compressed air.
Take into account the prevailing ambient
S
conditions.
Please observe the regulations applicable
S
to the place of use and comply with
national and local regulations.
Remove the packing with the exception of
S
the adhesive labels on the compressed air
ports (to prevent dirt from entering).
The packaging is intended for recycling.
(except for oiled paper which must be
disposed of ).
Slowly pressurize the complete system.
S
To do this use safety start-up valve type
HEL-... .
Use the product in its original state. Un-
S
authorized modification is not permitted.
Festo DNCV-... 0207a English
LF-... LR-...
Fig. 3
[°C] [%] [mbar]
Fig. 4
Fig. 5
21