Parkside Performance PKHAP 20-Li A1 Traduction Des Instructions D'origine page 21

CORDLESS COMBI HAMMER
DRILL PKHAP 20-LiA1
Introduction
Congratulations on the purchase of your
new appliance. You have chosen a high-
quality product. The operating instructions
are part of this product. They contain important
information about safety, usage and disposal.
Before using the product, please familiarise yourself
with all of the operating and safety instructions.
Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
The appliance is suitable for:
▯ Hammer-drilling into brickwork, concrete and
stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance is
not intended for commercial use.
Depicted components
Function selector switch
Release button for the function selector switch
ON/OFF switch
Rotation direction switch/lock
Release button for the battery pack
Battery pack*
Battery charge level button
Battery display LED
Rotation speed preselector dial
LED work light
Additional handle
Tool holder with dust protector cap
Locking collar
Locking button for the depth stop
Depth stop
High-speed charger*
Red charge control LED
Green charge control LED
│ GB │ IE
■ 16
Package contents
1 cordless combi hammer drill
1 additional handle
1 metal depth stop
1 carrying case
1 set of operating instructions
Technical specifications
Cordless combi hammer drill: PKHAP 20-Li A1
Rated voltage:
Idle speed:
Stroke rate:
Impact energy:
Max. drill diameter:
Battery: PAP 20 A3*
Type:
Rated voltage:
Capacity:
Cells:
High-speed battery charger: PLG 20 A3*
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
* BATTERY AND CHARGER ARE NOT INCLUDED
ATTENTION!
Hot surface.
There is a risk of burns.
(DC)
20 V
n 0–950 rpm
0
0–4700 rpm
3 J
13 mm for steel
27 mm for wood
24 mm for concrete
LITHIUM ION
(DC)
20 V
4 Ah (80 Wh)
10
230–240 V ~ , 50 Hz (AC)
120 W
T3.15A
3.15 A
(DC)
21.5 V
4.5 A
approx. 60 min
II / (double insulation)
PKHAP 20-Li A1