Publicité
Les langues disponibles
Les langues disponibles
SSB 70 D2
9.4 Volume and audio settings
Any changes to the volume and audio settings are shown on the LED display (1) for approx. 2 seconds. The display then reverts back to
the standard display for the relevant mode.
9.4.1 Adjusting the volume
You can adjust the volume during playback using the volume buttons (30, 32) on the remote control. Alternatively, you can use the volume buttons (5, 6) on the
sound bar. You can also hold the buttons down the change the setting more quickly. The volume selected is shown on the LED display (1) for approx. 2 seconds.
If you set the volume to the lowest level, "V 00" flashes continuously on the LED display (1).
9.4.2 Muting the sound
Press the
button (13) to mute the sound temporarily. When the sound is muted, the volume level currently set flashes on the LED display (1).
9.4.3 Adjusting the treble and bass
You can adjust the treble to your requirements using the TREBLE+ (20) and TREBLE- (28) buttons.
To adjust the bass, press the BASS+ (21) and BASS- (27) buttons.
9.4.4 Selecting the audio settings
The sound bar has 4 pre-set audio settings. Press the relevant button (22, 23, 25, 26) to select the audio settings you want. The audio settings selected are shown
as follows for about 2 seconds on the LED display (1):
9.4.5 "MOVIE" audio settings
Select these audio settings to select the sound settings to play back e.g. films or documentaries.
9.4.6 "3D" audio settings
Select these audio settings to give the current playback a virtual 3D surround sound.
9.4.7 "DIALOG" audio settings
Select these audio settings to select the sound settings for voice playback. This setting is recommended for news programmes, among others.
9.4.8 "MUSIC" audio settings
This setting optimises the sound settings for music playback.
26 - English
Audio setting
LED display
CINE
MOVIE
3d
3D
dIA
DIALOG
SONG
MUSIC
Publicité
