Publicité
Les langues disponibles
Les langues disponibles
If you want to use a hard drive as a USB playback device, use a Y-cable with a separate power supply to connect it.
Please note there can occasionally be compatibility issues between the USB storage device and the sound bar, meaning only limited functionality
is available or it may not function at all. If this happens, try a different USB storage device.
It isn't possible to select USB mode when no USB device has been connected. Instead, AUX mode is displayed.
•
Connect the USB storage device to the USB port (4) on the sound bar.
•
If there is a USB device connected already, press the "USB" button (34) on the remote control to select this mode.
•
Use the
(17),
(19),
•
You can use the volume buttons (30, 32) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
Control functions available in "USB" mode:
Action
Press the
button (17).
Press the
button (17) if playback was previously paused with
the
button (19).
Briefly press the
button (18).
Press and hold the
Briefly press the
button (31).
Press and hold the
Press the
button (19).
Pressing the
button (29) repeats the track currently being played (display shows "ON") or repeats all tracks stored on the storage device (display shows
"AL").
CAUTION! The USB port (4) must not be used to charge external devices.
9.3.5 "AUX" mode
Use this mode to connect a playback device with a Cinch output, e.g. a DVD player or satellite receiver. Use the adapter cable provided (E).
•
Connect the Cinch output from your playback device to the AUX jack (12) on the sound bar.
•
Switch the sound bar on using the standby button
•
Press the "AUX" button (35) on the remote control to select this mode.
•
You can use the volume buttons (30, 32) to adjust the volume to your requirements.
•
If you wish, you can change the audio settings using the relevant buttons on the remote control.
(18) and
(31) buttons on the remote control to control the music tracks.
button (18).
button (31).
LED display
ON
AL
(2, 36).
Function
Pause / Resume current track.
Resume playback at beginning of last folder played.
Skip to next track.
Skip to 1st track of next folder.
Skip to previous track.
Skip to 1st track of previous folder.
Pause playback, playback continues with the first track in the last folder
played when the
button (17) is pressed.
Function
Repeats the current track.
Repeats all tracks.
SSB 70 D2
English - 25
Publicité
