WAGNER FURNO 550 18V Guide D'utilisation page 13

SUGGESTED HEAT SETTINGS
Always protect glass when working near windows.
Attention
Use
DIY Drying paint
Drying spackle
Soften paint, caulking and putty for easier removal
Shrink plastic film for wrapping
Thawing frozen pipes
Arts & Crafts
Embossing
Creating greeting cards and invitations
Shrink wrapping presents
Making jewelry
Repairing candles
Popping bubbles in resin
Making ornaments
Forming foam
Making soap
Decorating cookies
Melting glue
Creating model planes and cars
Automotive
Removing stickers and decals
Applying and removing window tint
Electronics Repairing smartphone and tablets
Repairing gaming consoles
Shrinking heat shrink tubes for electrical repair
* Not included with all models.
NOZZLE ATTACHMENT
To attach a nozzle to the gun:
1. Set the heat tool upright on a level surface until the tip is cool.
2. Set the nozzle onto the tip of the heat tool and push firmly into place by hand.
To remove a nozzle:
1. Set the heat tool upright on a level surface until the tip is cool.
2. Pull the nozzle off of the tip.
Setting Nozzle*
HIGH Flare
HIGH Curved
LOW/HIGH N/A
LOW Flare
LOW N/A
LOW Curved
LOW N/A
LOW Flare
LOW/HIGH N/A
LOW Curved
LOW Flare
LOW/HIGH Curved
LOW/HIGH Flare
LOW N/A
LOW Curved
LOW N/A
HIGH N/A
LOW/HIGH Flare
LOW/HIGH Flare
LOW N/A
LOW Curved
LOW Curved
13
EN