Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
This versatile heat tool is designed for smaller repair jobs like tube shrink wrapping for electrical repair
of game consoles and other electronic devices; automotive jobs such as applying/removing window
tint; Do-It-Yourself jobs like scraping paint, drying paint or spackle; and/or craft-related jobs like making
ornaments, embossing or repairing candles.
SPECIFICATIONS
Heat Output Approximately 1000°F on high, approximately 500°F on low
Charger input voltage 120 V~ 60 Hz
Battery charging current 4.0A
Battery Run Time approximately 15 minutes on Low, 7 minutes on High.
USING THE HEAT TOOL
Always read the safety information included in this manual before using the heat
tool.
Tools and paint scrapings become very hot. To avoid burns, use work gloves and eye
protection when scraping.
ATTACHING THE BATTERY
1. Make sure battery is completely charged per steps on page 9.
2. Insert the battery into the front of the heat gun until you
hear it click into place.
3. The indicator light will show that the battery is properly
installed into the heat tool. If the light does not turn on,
the battery is not properly installed or needs to be charged.
4. To remove the battery, make sure the heat tool has properly
cooled (see Cool Down Procedure, page 12). Press the
battery release button on the front of the battery and pull
out of the heat tool.
Wattage 350 Watts on high, 170 Watts on low. Operates on 18VDC.
Weight 2.06 pounds
This tool is listed by the Canadian Standards Association, to United
States and Canadian Standards.
11
EN
Publicité
