Publicité
Les langues disponibles
Les langues disponibles
HEAT TOOL COMPONENTS
1
7
8
#
Item
1
Variable temperature
switch
2
Lock OFF button
3
Lock ON button
4
Trigger
5
Battery
6
Battery release button
7
Bumpers
8
Flare nozzle
9
Curved deflector
10
EN
9
Description
Approximately 1000°F on high, approximately 500°F on low. Refer to the
Heating Guidelines (page 13) to determine the appropriate heat setting for
the task you are doing.
Prevents accidental activation of the trigger. This must be pushed at the
same time as the trigger is pulled in order for the tool to work.
Will lock the trigger in the ON position to reduce fatigue and for hands-free
jobs. To release, pull the trigger.
Activates the heat tool. Heat will not be generated until the trigger is pulled.
Provides power to the heat tool. Full charge in 35 minutes.
Press this to release the battery from the heat tool.
Allows the heat tool to be placed flat on a surface (nozzle pointing up) for
hands-free operation or cool down.
Directs a long, narrow heat pattern to the work surface. Ideal for removing
paint or varnish from large, flat surfaces. It should be used in conjunction
with a flat scraper.
Disperses the heat flow evenly around the whole work surface. Ideal for
thawing frozen pipes, solder pipe work, bending plastics or heat shrinking
electrical insulating tubing.
1
4
5
6
7
2
3
7
Publicité
