Télécharger Imprimer la page

LIVARNO home 368928 2010 Notice De Montage page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery
1 x metal locker, unassembled (1-9)
1 x assembly materials (A-I)
1 x assembly instructions
Technical data
Dimensions: approx. 180 x 38 x 38cm
(W x H x D)
Max. load (per shelf)
3
3kg
Date of manufacture (month/year):
03/2021
Intended use
The product is designed for use as a storage
locker indoors. The product is intended only for
private and not for commercial use.
Safety instructions
Danger to life!
• Risk of suffocation for children! Never leave
children unsupervised with the packaging
material or product. The product may become
unstable and tip to one side and/or fall over.
This can lead to injuries or damage.
• The product is not for climbing on or playing
with! Make sure that people, particularly
children, do not stand on the product or pull
themselves up on it. The product may fall over.
Risk of injury!
• Mind your fingers when assembling! The prod-
uct contains components with sharp edges.
• Before using the product check for correct
stability!
• Stand the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• The product may be used only for its intended
purpose.
• Check the product for damage or wear before
each use.
The product may be used only when in good
working order and condition! Do not use the
product when there is visible or suspected
damage.
• Never stand or sit on the product.
• Do not leave any wet items in the product for
any lengthy period of time.
• Do not store any unpackaged foodstuffs in this
product.
• Assemble the product on a clean and soft
surface to protect both the product and your
floor against scratches and dents.
• Ensure that the wall used for wall assembly of
the product is a suitable one. Unsuitable wall
surfaces can lead to injury/damage.
Assembly
Two people should assemble the product be-
cause of its size.
The following tools are required to assemble
the product, which are not supplied: a Phillips
screwdriver, a rubber mallet, and a drill.
1. Place the product on an even and soft surface
(Warning: hard surfaces may cause scratch-
ing of the product!).
2. Assemble the frame of the product as shown
in figs. B-E.
Note: For ease of assembly, first assemble the
product from top to bottom either with it standing
upside down or lying flat. While doing so,
ensure the three screw holes in the top (1) are
at the back because they hold the back wall in
place (fig. B).
Make sure that the rail of the side wall (4) faces
towards the front. It is needed for latching and
prevents the door from accidentally opening
inwards (fig. B).
3. If the foot stops (H) cannot be pressed in with
the thumb, use a rubber mallet (fig. C). Only
afterwards screw in the knurled-head screw (G)
(fig. C).
4. Assemble the lock (E) and the handle (B) of
the door (fig. F).
5. Insert the door into the frame by hooking it in
at the bottom, pressing down the pin of the
door, and allowing it to snap into the hole in
the top (fig. G).
6. Stand the product flat on the ground.
7. Compensate for any unevenness in the floor
by screwing the knurled-head screws in or out.
8. The attachment to the wall gives additional
stability and safety. Use the drill to drill a hole
in the wall and affix the other side of the brack-
et (I) to the wall using appropriate assembly
materials (not included in delivery) (fig. G).
Note: Consult your retailer regarding what
assembly materials (dowels and screws) to use
for your masonry.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature. Only clean the pro-
duct with a damp cloth and wipe dry afterwards.
IMPORTANT! Never clean the product with harsh
cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling. The code
consists of the recycling symbol – which
is meant to reflect the recycling cycle – and a
number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under continuous quality control. DELTA-SPORT
HANDELSKONTOR GmbH gives private
end customers a three-year guarantee on this
product from the date of purchase (guarantee
period) in accordance with the following provi-
sions. The guarantee is only valid for material
and manufacturing defects. The guarantee does
not cover parts subject to normal wear and tear
that are thus considered wear parts (e.g. batter-
ies) or fragile parts such as switches, recharge-
able batteries, or parts made of glass.
Claims under this guarantee are excluded if the
product has been used incorrectly, improperly,
or contrary to the intended purpose, or if the
provisions in the Assembly instructions were not
observed, unless the end customer proves that
a material or manufacturing defect exists that
was not caused by one of the aforementioned
circumstances.
Claims under the guarantee can only be made
within the guarantee period by presenting the
original sales receipt. Please therefore keep the
original sales receipt. The guarantee period is
not extended by any repairs carried out under
the guarantee, under statutory guarantees, or
as a gesture of goodwill. This also applies to
replaced and repaired parts.
If you wish to make a claim please first contact
the service hotline mentioned below or contact
us by e-mail. If there is a guarantee case, then
the product will be repaired or replaced free
of charge to you or the purchase price will be
refunded, depending on our choice.
Your legal rights, in particular guarantee claims
against the respective seller, are not limited by
this guarantee.
IAN: 368928_2010
Service Great Britain
Tel.:
0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.:
1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
GB/IE/NI
9

Publicité

loading