Breitling SUPEROCEAN HERITAGE CHRONOGRAPH 44 Mode D'emploi page 11

II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3 shows the
measurement in seconds.
2. To interrupt the measurement, press pushpiece A once more.
To restart the time measurement, press pushpiece A. This
procedure makes it possible to add up several short times.
3. The chronograph is reset to zero by pressing pushpiece B,
once the fi nal measurement has been stopped.
16
SPECIAL CHARACTERISTICS
UNIDIRECTIONAL BEZEL WITH INDEX MARKERS
The bezel of your watch is marked with 12 index markers: they
are used as points of reference to mark a start time or a limit
time you wish to remember. On models with no chronograph
functions, they also provide a "minute chrono" function enabling
you to measure the elapsed time in minutes.
For safety, the bezel can only turn counterclockwise.
17