Gaggenau RB282 Notice D'utilisation page 39

Manual connection with the home network (WLAN)
If the WLAN router present does not have a WPS
function, or if this is unknown, you can manually connect
the refrigerator with the home network.
·
1 Press the button.
The refrigerator compartment temperature display
shows Cn.
2 Press button -/+ refrigerator compartment until the
refrigerator compartment temperature display
shows SA and the freezer compartment
temperature display shows OF.
3 Press button -/+ freezer compartment.
The appliance is ready for the manual connection.
The freezer compartment temperature display
shows an animation.
The appliance is ready for the manual connection
for as long as the animation is displayed.
4 The refrigerator has now set up its own WLAN
network with the network name HomeConnect.
You can now access this network with your mobile
device.
5 Call up the WLAN settings in the settings menu of
the mobile device.
6 Connect the mobile device with the WLAN network
HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to establish the
connection.
7 After successfully connecting, open the Home
Connect app on the mobile device.
The app will search for the refrigerator.
8 As soon as the refrigerator has been found, enter
the network name (SSID) and the password (Key) of
your own home network (WLAN) into the
corresponding fields.
9 Confirm with the button Transmit to domestic
appliances.
– If the connection is successful, On flashes up in
the freezer compartment temperature display.
You can now connect the refrigerator with the
app.
– If the freezer compartment temperature display
shows OF, no connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting the refrigerator with the app
·
1 Press the button.
The refrigerator compartment temperature display
shows Cn.
2 Press button -/+ refrigerator compartment until the
refrigerator compartment temperature display
shows PA and the freezer compartment temperature
display shows OF.
3 Press the button -/+ freezer compartment to
connect the appliance with the app.
The freezer compartment temperature display
shows an animation.
As soon as the refrigerator and the app are
connected, the freezer compartment temperature
display shows On.
4 Wait until the refrigerator is displayed in the Home
Connect app on the mobile device. Then select +
(add).
If the refrigerator is not automatically displayed,
first select Search for domestic appliances and
then Connect domestic appliance in the Home
Connect app.
5 Follow the instructions in the app until the process
is complete.
Refrigerator compartment temperature display
shows PA and freezer compartment temperature
display shows On.
The refrigerator is successfully connected with the
app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If Er appears in the freezer compartment
temperature display, reset the Home
Connectsettings.
Note: When resetting, all the Home Connect
settings are reset.
Home Connect
en
39