Antar AT53059 Manuel D'utilisation page 5

USE
The orthosis has adjustable strap length. Try the product on and cut the straps to the right length, then fix them with Velcro straps. After
adjusting the appropriate length you can put the orthosis on.
1. Make sure the brace is in the correct position. Place your hands in the pockets of the belt. Fasten the brace with the Velcro fasteners on
the main strap and tighten the abdominal strap firmly.
2. Then fasten the two lower secondary straps by gripping both ends at the same time.
3. Fasten the top two additional straps in the same way to increase the stability of the support.
4. Finally, make sure once again that the product fits correctly on the spine, is worn at the correct height and that the straps are squeezed
tightly enough to provide stability.
CLEANING AND MAINTENANCE
The product is recommended to be washed by hand with a mild detergent, at a temperature of up to 40°C. Do not wash in a washing
machine. Do not use strong detergents, bleach or rough objects for cleaning. Dry flat laid out in the shade, do not expose to direct sunlight.
Do not tumble dry. Do not dry clean. Do not iron.
STORAGE
Store the product in a dry cool room, away from moisture and direct sunlight.
HOW TO DISPOSE OF THE PRODUCT
Once the product has been taken out of service, the medical device can be disposed of as normal household waste.
AT_53059