Makita DUC306 Manuel D'instructions page 8

Saw chain type
Guide bar Guide bar length
Cutting length
Pitch
Gauge
Type
Sprocket Number of teeth
Pitch
Saw chain type
Number of drive links
Guide bar Guide bar length
Cutting length
Pitch
Gauge
Type
Sprocket Number of teeth
Pitch
Saw chain type
Number of drive links
Guide bar Guide bar length
Cutting length
Pitch
Gauge
Type
Sprocket Number of teeth
Pitch
Number of drive links
Guide bar
Sprocket
WARNING:
Use appropriate combination of the guide bar, saw chain and sprocket. Otherwise personal injury
may result.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear eye protection.
250 mm
23.8 cm
40
250 mm
23.8 cm
46
250 mm
24.4 cm
Saw chain type
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
90PX
300 mm
29.4 cm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"
91PX
46
300 mm
29.4 cm
3/8"
1.3 mm
Sprocket nose bar
6
3/8"
80TXL
51
300 mm
28.5 cm
0.325"
1.1 mm
Sprocket nose bar
7
0.325"
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
WARNING - THIS CHAIN-SAW IS FOR
USE BY TRAINED TREE SERVICE
OPERATORS ONLY. USE WITHOUT
PROPER TRAINING CAN RESULT IN
SEVERE INJURIES.
8 ENGLISH
350 mm 400 mm
35.0 cm 38.7 cm
52 56
350 mm 400 mm
35.0 cm 38.7 cm
59 64
350 mm 400 mm
35.0 cm 38.4 cm
25AP
60
250 mm
25.3 cm
1/4"
1.3 mm
Carving bar
9
1/4"