Berker 7574 01 01 Mode D'emploi Et Instructions De Montage page 27

Triggering a function, operating loads
Consumers, such as lighting, blinds, etc., are operated using the touch-sensi-
tive control surfaces, and are dependent on the device programming.
P
Each touch on the touch-sensitive surface can be confirmed by an acous-
tic signal when the button sound
If the device is in standby mode, touch anywhere on the touch-sensitive
„
display area (1).
The last page/start page used is displayed.
P
If the proximity sensor in the menu
the display switches automatically to the last page/start page used upon
approaching.
Press a control surface in the display and functional area (9).
„
The stored function is executed.
P
The actuation pulse lasts for the duration of the actuation. Depending
on the function, short and long touches can trigger different actions, e.g.
switching/dimming or roller shutter/blind.
P
If no action is executed on the display within an adjustable time period, the
device returns automatically to standby display/to the screensaver – if this
is activated.
Setting device
Einstellungen System
Sprache der Sprache
Press control surface
„
07:22
editierbaren Texte System
The display changes to the menu
Tastenton Bildschirm
Select submenu
„
With / go to the next/previous page, on which up to 4 setting parameters
„
each can be selected.
Wecker
Einstellungen System
Press control surface for the parameter required.
„ Sprache der
Wecker
editierbaren Texte
EIN
The display changes to another page where you must select once again,
Weckzeit
or it changes directly to the setting of the parameter (Figure 5).
Seite 5 Seite 6
+
–
With / decrease/increase the parameter value, with
„
07 : 45
Tastenton
preset value (Figure 5) or with
ter (Table 1).
With confirm the entry.
„
The display returns to the previous menu level.
Sprache der
in the top display row (8).
editierbaren Texte
Tastenton
.
Wecker
EIN
Weckzeit
Seite 7
+
07 : 45
is switched on.
ON
-
.
Einstellungen System
Sprache
System
Bildschirm
/ activate/deactivate the parame-
ON OFF
is activated,
Einstellungen System
Sprache der Sprache
editierbaren Texte System
Tastenton Bildschirm
/ scroll to a
z
Sprache der
editierbaren Texte
Tastenton
27