Publicité
Les langues disponibles
Les langues disponibles
Volvo XC 70
2007 - ...
Ref. 1699
Fitting instructions
1. Disassemble the bumper and remove the metal buffer beam. Loosen the exhaust and disassemble the
heat-shield.
2. Shove the towbar through the liberated holes at the back of the vehicle in the chassis beams until it
reaches the provided holes, insert bolts and plates (1) and (2) and fix everything firmly (see tension).
3. Re-assemble the metal buffer beam, the heat-shield and the exhaust back on the vehicle.
4. Make an incision in the bumper according to drawing 1. Re-assemble the bumper on the vehicle.
5. Assemble the ball, the security shackle (-s) and the socket plate holder (-p), insert the bolts and tighten
firmly (see tension).
Disassemble the bumper
-
2x3 screws at the mud casing
-
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
Publicité
