Publicité
Les langues disponibles
Les langues disponibles
turn the fuel off at the conclusion of
mowing.
• Only use the lawn mower for the
purpose for which it is designed, for
cutting and collecting grass. Any
other use can be hazardous,
causing damage to the machine.
Maintenance and storage
• Keep all nuts, bolts and screws
tight to be sure the equipment is in
safe working condition.
• Never store the equipment with
petrol in the tank inside a building
where fumes can reach an open
flame or spark.
• Allow the engine to cool before
storing in any enclosure.
• To reduce the fire hazard, keep
the engine, silencer, battery
compartment and petrol storage
area free of grass, leaves, or
excessive grease.
• Check the grass catcher frequently
for wear or deterioration.
• Replace worn or damaged parts
for safety.
• If the fuel tank has to be drained,
this should be done outdoors.
Do not touch rotating
Refuel in a well
ventilated area with
the engine stopped.
Never use the mower unless all
guards or grassbox provided by
manufacturer are in position.
Stop the engine and disconnect the
spark plug wire and inspect mower
WARNING
blade.
WARNING
if: (a) The mower begins to vibrate
abnormally; or
(b) After striking a foreign object.
Repair any damage before
continuing further operation of the
mower.
Never modify the mower in any way.
Use only replacement parts made
and guaranteed by the original
manufacturer of your mower.
Keep all safety devices (guards and
switches) in place and working.
INSTRUCTIONS D'ENTRETIEN
Before carrying out cleaning,
adjustment, repair and maintenance
work
• place the appliance on firm, flat
ground,
• switch off the combustion engine
and let it cool down,
• remove the spark plug connector.
Caution – risk of injury!
Keep the spark plug socket away,
an unintentional ignition spark can
cause fires or electric shocks.
Unintentional contact of the spark
plug with the spark plug socket can
cause the combustion engine to
start unexpectedly.
Risk of injury from the cutting blade!
Pulling the starter rope spins the
work tool when the cutting blade
is engaged. When using the jumper
cable, make sure to always leave a
space sufficient distance between
the cutting blade and the user, in
particular at the level of the hands
and the feet.
79
Publicité
