Mitsubishi Electric PAR-33MAAG Manuel D'instructions page 54

Controller operation-Function settings
Function setting (CITY MULTI)
Function description
Make the indoor units' function settings from the remote controller as necessary.
The following settings should be made only for CITY MULTI units and as necessary.
•
Refer to the Installation Manual for how to make the settings for Mr. Slim units.
•
Refer to the indoor unit Installation Manual for information about the factory settings of indoor units,
•
function setting numbers, and setting values.
When changing the indoor units' function settings, record all the changes made to keep track of the
•
settings.
Button operation
1
Main
Maintenance
Initial setting
Service
Main display:
Cursor
F1
2
Service menu
Maintenance password
Remote controller check
Function setting
Main display:
Cursor
F1
54
Main menu
Page
F2 F3 F4
F2 F3 F4
Select "Service" on the Main menu (see page
20), and press the SELECT button.
Select "Function setting" on the Service Menu
screen, and press the SELECT button.
P
OFF