Mitsubishi Electric PAR-33MAAG Manuel D'instructions page 28

Controller operation-Function settings
Timer (Auto-Off timer)
Button operation
1
On/Off timer
On
Repeat
Auto-Off
Stop in
Setting display:
Cursor
F1
2
Auto-Off
Stop in
Select:
Cursor
F1
3
Auto-Off
Stop in
Select:
Cursor
F1
28
Timer
Yes
Off
No
No
--- min
F2 F3 F4
Auto-Off timer
No Yes
min
Cursor
F2 F3 F4
Auto-Off timer
No Yes
min
Time
F2 F3 F4
Bring up the Timer setting screen.
(Refer to page 26.)
Select "Auto-Off", and press the SELECT
button.
The Auto-Off timer will not work in the following cases:
when Auto-Off timer is disabled, during an error, during
check (in the service menu), during test run, during
remote controller diagnosis, during Function setting, when
the system is centrally controlled (when On/Off operation
or Timer operation from local controller is prohibited).
The current settings will appear.
Move the cursor to the "Auto-Off" or "Stop in ---
min" with the F1 or F2 button.
Change the setting with the F3 or F4 button.
• Auto-Off: No (disable)/Yes (enable)
Stop in --- min: Timer setting (The settable
•
range is 30 to 240 minutes in
10-minute increments.)
P
Main