Mitsubishi Electric PAR-33MAAG Manuel D'instructions page 35

4
Temp. range
Temp. range No /
Cool·Dry
Heat
Auto
Select:
Cursor
F1 F2
Temp. range
Temp. range No /
Cool·Dry
Heat
Auto
Changes saved
Main menu:
Room
Cool Set temp.
Mode
Yes
-
-
-
Temp.
F3 F4
Yes
-
-
-
Fri
Auto
Temp. Fan
Change the settings with the F3 or F4 button.
• Temp. range: No (unrestricted) or
Yes (restricted)
• Cool•Dry: Upper and lower limit temperature
• Heat: Upper and lower limit temperature
• Auto: Upper and lower limit temperature
Temperature setting ranges
Mode Lower limit
19 ~ 30ºC
*1
Cool•Dry
*3
(67 ~ 87ºF)
17 ~ 28ºC
*2
Heat
*3 (63 ~ 83ºF)
19 ~ 28ºC
Auto
*4
(67 ~ 83ºF)
* The settable range varies depending on the connected unit.
*1 Temperature ranges for the Cool, Dry, and Auto (dual set
point) modes can be set.
*2 Temperature ranges for the Heat and Auto (dual set point)
modes can be set.
*3 Temperature ranges for the Heat, Cool, and Dry modes
must meet the conditions below:
•
Upper limit for cooling - upper limit for heating ≥ Minimum
temperature difference (varies with indoor unit model)
•
Lower limit for cooling - lower limit for heating ≥ Minimum
temperature difference (varies with indoor unit model)
*4 Temperature range for the Auto (single set point) mode can
be set.
Press the SELECT button to save the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button
will appear on the Main display in the Full
mode when the temperature range is restricted.
(1ºC increments)
(1ºC increments)
(1ºC increments)
Upper limit
30 ~ 19ºC
(87 ~ 67ºF)
28 ~ 17ºC
(83 ~ 63ºF)
28 ~ 19ºC
(83 ~ 67ºF)
35