S+S Regeltechnik SHD Notice D'utilisation page 31

LCD-SHD
®
PREMASGARD
Display-Modul für Drucktransmitter
SHD / SHD-SD / SHD 692
konfigurierbar, dreh- und kippbar
für 0-10 V zu ModBus
Maintenance and care
LCD display module
The
device regularly for visible damage or dirt. If necessary, clean the display with a soft, slightly damp cloth. Do
not use aggressive cleaning agents or solvents, as they could damage the device.
Troubleshooting
•
No Display:
Check the power supply and correct wiring.
•
Incorrect values:
Check the scale and unit settings.
•
ModBus Communication Errors:
Make sure that the baud rate, parity, and address are set correctly, and that the ModBus network is
working properly.
Return
!
All devices returned to the manufacturer must be free of residual materials and other hazardous
substances. Residues of material on the housing can endanger people or the environment.
!
To return the device, especially if it is still a working device, use suitable transport packaging.
Disposal
Incorrect disposal can pose a risk to the environment. Dispose of equipment components and
packaging materials in an environmentally friendly manner in accordance with the country-
specific waste treatment and disposal regulations.
Do not dispose of with household waste. Ensure orderly disposal in accordance with national
requirements.
does not require any special maintenance. However, it is advisable to check the
31