S+S Regeltechnik SHD Notice D'utilisation page 24

LCD-SHD
®
PREMASGARD
Display-Modul für Drucktransmitter
SHD / SHD-SD / SHD 692
konfigurierbar, dreh- und kippbar
für 0-10 V zu ModBus
measuring range
RANGE - UNIT
bar
>DOWN< >SET<
range
>> main menu >> settings >> sensor >> measuring range
Selection unit:
>UP<
Selection MR:
psi):
Hint: The setting is made in the supplied basic arithmetic operation and
is not dependent on the unit set. The unit displayed and converted can
display unit
be above
Selection of the input unit of the pressure sensor in
bar or psi, then to the next point
solid (15 predefined measuring ranges for bar and
measurement range starts at 0 bar / 0 psi
Solid (in bar): Predefined end ranges
0.1 / 0.5 / 1 / 2.5 / 4 / 6 / 10 /
16 / 25 / 40 / 45 / 50 / 55 / 60
(greater than 60 to 80 can be set via free)
Solid (in psi):
10, 25, 50, 100, 150, 200, 250, 300,
400, 500, 600, 700, 800, 900, 1000
(greater than 1000 to 1200 can be set via Free)
Free (freely definable measuring range)
measurement range starts at 0 bar / 0 psi
>UP< until free appears, then >SET<.
Upper value is underlined.
Change values with >UP< or >DOWN<
and with >SET< confirm.
free (in bar):
max. 80.0 bar
0.1 to 1 bar in 0.1 steps.
from 1 bar in 0.5 steps.
free (in psi):
1200 psi max
10 to 100 psi in increments of 5.
100 to 1200 in 50's increments.
sensor
After selection back to
(p. 25) can be discontinued.
24
range
(p. 23)