S+S Regeltechnik SHD Notice D'utilisation page 25

LCD-SHD
®
PREMASGARD
Display-Modul für Drucktransmitter
SHD / SHD-SD / SHD 692
konfigurierbar, dreh- und kippbar
für 0-10 V zu ModBus
display unit
DISPLAY - UNIT
bar
>DOWN< >SET<
min/max time
average value
display
direction
DIRECTION
>DOWN< >SET<
contrast
CONTRAST
26
>DOWN< >SET<
>> Main Menu >> Settings >> Sensor >> Display Unit
Selection: bar, kPa, psi, inWC, atm, mWC
Hint: Selecting the unit does not affect the set measurement range (see
measuring range
>UP<
>> main menu >> settings >> sensor >> min/max time
Selection: Time for min/max values: 1h, 6 h, 12h, 24h
The smallest and largest calculated value within the above time period is
stored and displayed on request.
Info: Define displayed content -
>> main menu >> settings >> sensor >> average value
Selection: Number of measurements for averaging.
n = 1 to 10
The displayed value is the moving average of the last n measurements. The
measurements are carried out in approx. 1 Hz.
>> main menu >> settings >> display
Selection of: Orientation–
Contrast–
Backlight –
Representation-
return: back to
>> main menu >> settings >> display >> direction
Selection: Rotate the display in 90° steps. The arrow shows the
reading direction of the power display.
>DOWN<
>UP<:
>UP<
Note: Alignment only affects the power indicator.
Info: Displayed Content -
>> main menu >> settings >> display >> contrast
The contrast value can be adjusted to optimize readability in different lighting
conditions
Selection: Contrast adjustment from 10 to 40.
>UP<
The selection is displayed immediately. The change will only be made with
>SET< stored.
(p. 24).
presentation
direction (p. 25),
contrast (p. 25),
backlight
(p. 26),
presentation
settings
(p. 26)
: 90° - Steps counterclockwise.
90° - Steps clockwise.
presentation
25
(p. 25).
(p. 26)
(p. 26)