S+S Regeltechnik SHD Notice D'utilisation page 20

LCD-SHD
®
PREMASGARD
Display-Modul für Drucktransmitter
SHD / SHD-SD / SHD 692
konfigurierbar, dreh- und kippbar
für 0-10 V zu ModBus
Assembly
Attach the LCD-SHD display module to the form connector A of the pressure transmitter in the de-energized
state. Make sure that the electrical connection is correct so that the signals are transmitted to the correct
sockets. Incorrect input signals can damage the device.
1. Detach the connector including the seal from the sensor.
2. Attach the LCD-SHD display module including the enclosed seal and screw it onto the sensor using a
screw extension.
CAUTION! Make sure that the seals are undamaged and that the cable gland and seals are correctly
seated to ensure the degree of protection.
3. Attach the connector including gasket to the display module.
20