Kinetico KCRO plus Manuel D'utilisation page 5

Installation Overview
F
I
Tools Required for Installation
† Drill with 3/8" (9.55mm) drill bit
† Screwdriver
† Adjustable wrench
Pre-Installation Checklist
1. System must be located where it will not be subject to physical impacts or rough contact by heavy objects.
2. System must be located next to feed water plumbing and drain water plumbing. Typical installation
locations include: under the kitchen sink, or in a basement location as close as possible to the faucet
for best results.
3. The air-gap faucet installation will require a small hole to be drilled into the drain pipe under the sink.
4. The air-gap faucet requires a 1" (3.175mm) hole in the sink or counter top.
A
B
C
D
E
G
J
K (not shown)
L
M (behind cover)
A. Air-gap faucet
B. Faucet quick connect fitting
C. Drain tubing to drain saddle (white)
D. Faucet tubing (blue)
E. Postfilter
F. Feed valve assembly
G. Drain tubing to faucet (black)
H. Drain saddle connection assembly
I. Feed water tubing (green)
H
J. Tank valve
K. Tank tubing (white)
L. Product water storage tank
M. Four-stage membrane cartridge
4
Kinetico KCRO+