Kinetico KCRO plus Manuel D'utilisation page 4

Système d'eau potable à osmose inverse
Performance Specifications
Membrane Cartridge Production
System
2
Production
TDS Rejection
Recovery
3
Measured without tank
1
System tested at 50 psig, 750ppm TDS at 77°F.
2
The percentage of the feed water available as reverse osmosis treated water under normal operating conditions.
3
Feed Water Requirements
Pressure 40-80 psi (275 kPa - 552 kPa)
Temp 40˚F - 100˚F (4˚C - 38˚C)
TDS <2000 mg/L
Chlorine <1.0 mg/L
Turbidity <NTU
SDI <5
pH 4-8
Feed water must be potable, municipal water. Must be free of potential membrane foulants such as iron, hydrogen
sulfide and manganese. Do not use with water that is microbiologically unsafe or of unknown quality without adequate
disinfection before or after the system.
Description of System and Replacement Intervals
Stage Description
4-Stage Cartridge
1. 20 micron sediment prefilter
2. Granular activated carbon prefilter
1-4
3. Reverse osmosis membrane
4. Granular activated carbon postfilter
Granular activated carbon postfilter, located
5
inline between tank and faucet
50 GPD
1 1
14.61 GPD
96.5%
17.8%
3
Replacement Interval Part Number
12 months
6 - 12 months
17069
17070