Publicité
Les langues disponibles
Les langues disponibles
Introduction to the KCRO+
Congratulations on your purchase of the KCRO+ reverse osmosis system. The KCRO+ features a four-
stage single system cartridge which includes two prefilters, a membrane and a postfilter. The fifth stage,
an in-line carbon postfilter, is placed between the tank and faucet.
When properly maintained, this system will provide you with years of trouble-free service. The next
sections contain important information on the proper care and maintenance of your system. Please take
a few minutes to read through this information.
The cartridges in this system must be replaced on a regular basis to maintain efficiency and to ensure
high water quality. These cartridges work together and must be replaced every 6-12 months. Any
significant change in performance of the system should be investigated promptly to avoid secondary
damage or deterioration to other parts of the system.
Normally, the system cartridge is replaced during an annual filter change. However, if at any time you
notice a reduction in water production or an unpleasant taste in the product water, it may be time to
replace the 4-stage system cartridge and the in-line postfilter cartridge. Kinetico recommends replacing
the 4-stage system cartridge when TDS reduction falls below 85%.
NOTE: Improperly installed systems could result in water damage due to leaks or flooding. Proper
installation of this system requires knowledge of standard sink plumbing, including any
applicable plumbing codes, and familiarity with the proper use of common hand and power
tools. This system has been designed for installation by trained professionals, to ensure
adherence to all state and local plumbing codes.
System Specifications
Dimensions and Weight
System
9.75" W x 13.5" D x 15.5" H
Dimensions
(24.8 x 34.3 x 39.4 cm)
Weight
11 lbs (5 kg)
Shipping Box
14.5"L x 11.25"W x 20"H
Dimensions
(36.8 x 28.6 x 50.8 cm)
Weight
13.7 lbs (6.2 kg)
2
Kinetico KCRO+
Publicité
