Minitrix 18296 Mode D'emploi page 3

Safety Notes
• Analog 14 volts DC, digital 19 volts AC.
• Do not expose the model to direct sunlight, extreme changes
in temperature, or high humidity.
• The wire used for feeder connections to the track may be a
maximum of 2 meters / 78 inches long.
• WARNING! Sharp edges and points required for operation.
Important Notes
• The operating instructions and the packaging are a compo-
nent part of the product and must therefore be kept as well as
transferred along with the product to others.
• Please see your authorized Trix dealer for repairs or spare parts.
• The warranty card included with this product specifies the
warranty conditions.
• Disposing: www.maerklin.com/en/imprint.html
• The LEDs in this item correspond to Laser Class 1 according
to Standard EN 60825-1.
• The coupling drawbars included with the models can be used
for a prototypical car spacing.
General Note to Avoid Electromagnetic Interference: A
permanent, flawless wheel-rail contact is required in order to
guarantee operation for which a model is designed. Do not make
any changes to current-conducting parts.
Functions
• Interior lighting built in. Can be controlled with an additional
decoder.
• Marker lights built in. Can be controlled with an additional
decoder.
• Car includes 14-pin digital interface.
See page 10.
• The light function can be changed by reconnecting
the bridge plug.
- Innen: Interior lighting
- Schluss: Marker lights
- In+Sch: Interior lighting & marker lights
- aus: Everything off
The bridge plug must be plugged in the „inside" position for
operation on digital layouts, or a decoder must be installed.
• We recommend installing a decoder for trouble-free operati-
on on digital layouts.
• The following light functions can be controlled separately
with a decoder:
- Rear marker lights (LV)
- Front marker lights (LR)
- Interior lighting (Aux 1)
- Interior lighting toilet (Aux 2)
• For operation with the 66857 decoder, for example, the CVs
must be programmed as follows:
CV33 = 3; CV34 = 3; CV35 = 4; CV36 = 8; CV37-46 = 0;
CV113 = 128; CV114 = 32; CV115 = 0; CV116 = 0; CV121 = 0;
CV122 = 0
3