Medela Freestyle Mode D'emploi page 13

Masquer les pouces Voir aussi pour Freestyle:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Troubleshooting
Trouble
If there is low or  
no suction.
If the pump
gets wet
«Err» accompanied  
by 3 beeps 
Mains adapter symbol 
flashing and pump does 
not turn on
Battery power indicator 
flashes and shows  
four bars
Solution 
All connections of the kit and breastpump are secure.
Back cap is firmly attached at three connection points.
Hold the bottle on the breastshield not on the connector.
Breastshield is assembled correctly and forms a complete
seal around the breast.
If single pumping, make sure the unused tube is securely
connected to the tubing dock.
Take care not to kink tubing.
Unplug the mains adapter from the wall socket and turn the
pump off.
I   Make sure not to turn the pump upside down. Display has
to face up.
I  Store the pump for 24 hours in a dry and warm place.
Note:
Do not try to speed up the drying process by applying heat
or by using any drying equipment.
Do not expose the pump to direct sunlight.
Contact local Medela office or sales point.
Contact local Medela office or sales point.
Contact local Medela office or sales point.
13

Publicité

Table des Matières
loading

Table des Matières