Nederman 20376724 Manuel D'instructions page 14

EN Fan Start/Stop Device
Caution! Type of Risk.
Cautions indicate a potential hazard to the product but not to personnel, and how that hazard may
be avoided.
NOTE!
3 Description
3.1 Intended use
This start/stop device is specially designed for use together with Nederman exhaust extraction
systems such as MagnaTrack, MagnaStack, MagnaRail, Pneumatic Track or Pneumatic Rail
System.
NOTE!
But, the two systems can be installed and operate independently in the same location, see Section
4.4.1 'Connecting new and old systems'.
3.2 Main components
Receiver, see figure 1:
1.
Relay function LEDs (5,1,2,3,4) (red)
2.
Power supply LEDs (red)
3.
Internal antenna
4.
Function button
5.
Select button
6.
LED 8 (yellow)
7.
LED 10 (orange)
Transmitter, see figure 2:
1.
LED (green or red)
2.
Black wire, negative (-)
3.
Red wire, positive(+)
3.3 Technical specifications
Table 3-1: Technical specifications
Frequency
Model type
Coding
Code combination
Temperature
Power supply
Weight
Size
Protection
Transmission range
Relay output
4 Installation
WARNING!
Work with electric equipment is to be carried out by a qualified electrician.
14
Notes contain other information that is of special interest to the user.
A fan start/stop device manufactured before April, 2013, does not work with this system.
Transmitter
2.4 GHz, 16 channels
FM
Digital pulse
4.000.000.000
-20 to 55 °C
12/24 V DC, 20 mA
100 g
65 x 112 x 35 mm
IP 65
Up to 50 meters
Risk of electric shock.
8.
LED 7 (red)
9.
Relay for exhaust fan
10.
Terminal relay for exhaust fan
11.
Power terminal
12.
Fuse T 2A 250 V
13.
Power card (24 - 230V AC)
Receiver
2.4 GHz, 16 channels
FM
Digital pulse
4.000.000.000
-20 to 55 °C
24V AC
360 g
120 x 116 x 50 mm
IP 66
Potential free, 8 A, breaks 2.5 minutes after
transmitting signal has disappeared.