SilverCrest 277095 Mode D'emploi page 30

CAUTION
► Before connecting the appliance, compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
These data must agree so that no damage is sustained by the appliance.
► Ensure that the mains power cable is not damaged and is not running over
hot surfaces and/or sharp edges.
► Ensure that the mains power cable is not taut or knotted.
► Always remove the mains plug from the wall socket after each use.
Operating components
Display
ON button
2
3 SET button
4 OFF button
5 Operating LED
6 Lid
Stainless steel bath
7
MAX mark for maximum fill level
8
9 Basket insert for small items
10
Bracelet holder
11 Spacer ring
12
Spindle for a maximum of 2 CDs/DVDs
Handling and operation
This section provides you with important information on handling and using the
appliance.
How ultrasonic cleaning works
The ultrasonic field created in the cleaning fluid during operation generates rapidly
alternately waves with high and low pressure. These waves produce air bubbles
on the surface of the item being cleaned which quickly burst open again. This
process works mechanically on the surfaces of the item and thus loosens dirt and
other residues. It can, however, also deepen already existing scratches.
SUR 48 C4
GB │ IE │ 27 ■