Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
Install
• Plug the inner glass into glass pressure groove.
• Both the right and left sides should line up with the grooves
and push the glass to its place.
• Put on the oven door.
Replacing the oven lamp
• If the bulb in the oven light fails, it must be replaced.
Risk of electric shock!
• Switch off the circuit breaker in the fuse box.
• Place a tea towel in the oven when it is cold to prevent damage.
• Unscrew the glass cover by turning it anti-clockwise.
• Replace the bulb with one of the same type.
• Screw the glass cover back in.
• Remove the tea towel and switch on the circuit breaker.
Troubleshooting
The oven may have some abnormal breakdown during working, you can check the fault list
before calling to the after-sell service, maybe some breakdown you can repair by yourself.
Normal operation:
•
When first using the oven, it may have some situation of peculiar smell and smoking for
some hours; Open the heating pattern to let the oven burn without anything for 1 hour
when use the oven for the first time, then close the heating function, waiting for some
time until the oven is cold, open the door and clean the oven.
•
When oven working, it may have sounds of crisp because of well of metal.
•
If the heating foods have some moisture, the heating emission hole may blow steam
during the working operation.
•
The fan will start to work after 15 minutes after oven begin to work. Even if the oven is
closed, fan will continue to work for 35 minutes.
•
Please preheat before put food in oven when for baking.
18
EN
Publicité
