Ferroli DIVATOP D HF Serie Instructions D'utilisation page 47

DIVATOP D HF
Indication during operation
Heating
A heating request (generated by the Room Thermos-
tat or Remote Timer Control) is indicated by the flas-
hing radiator symbol.
When the burner is lit, the flame symbol appears and
the 3 levels indicate the actual intensity.
bar
29
27
Frost protection
In frost protection mode (flow temperature below 5°C) the flame symbol appears.
Fault
In case of a fault, the display shows the fault code with different graphics depending on the type.
A-type fault (fig. 5): To unlock the boiler in the presence of this type of fault, press the button
"Confirm?" appears. Then confirm with the button
F-type fault (fig. 4): A fault which will be automatically reset after the problem has been eliminated.
F10
EN
°C
°C
fig. 2
fig. 4
cod. 3540000180 - Rev. 02 - 06/2024
DHW (domestic hot water)
A DHW request (generated by hot water draw-off) is
indicated by the flashing faucet icon.
When the burner is lit, the flame symbol appears and
the 3 levels indicate the actual intensity.
bar
29
27
.
A01
°C
°C
fig. 3
until the message
fig. 5
47