Publicité
Les langues disponibles
Les langues disponibles
If you have further questions, please specify the
following:
1. Motor manufacturer
2. Kind of current of the motor
3. Data from the machine type plate
4. Data from the switch type plate
If you return the motor, always return the com-
plete drive unit with the switch.
15. Special Accessories
Cross cutting jig
Circular cutting device
Bit stop
Grinding belt device
Underframe for tables
Automatic starter, type ALV 2
Type ALV 10
Saw bands
for wood:
12/0.5/2360 mm, 4 teeth/inch
Standard saw band
15/0.5/2360 mm, 4 teeth/inch
Straight upright cuts with longitudinal stop
for wood and synthetic materials:
6/0.5/2360 mm, 6 teeth/inch
Turning works with small radius 25 mm
12/0.5/2360 mm, 6 teeth/inch
Precision cutting works
Different materials:
wood, synthetic materials, metals
3.5/0.5/2360 mm, 14 teeth/inch
Extra-fine cutting works, extremely small radiuses
Non-ferrous metals up to 10 mm
6/0.65/2360 mm, 22 teeth/inch
straight cuts and turning works
Synthetic materials, non-ferrous metals
6/0.65/2360 mm, 10 teeth/inch
Synthetic materials, non-ferrous metals above 15
mm
12/0.65/2360 mm, 10 teeth/inch
straight cuts and large radiuses > 60 mm
28 | GB
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Old devices must not be disposed of with house-
hold waste!
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
7312 0025
es for the environment and human health due to po-
7319 0710
tentially hazardous substances that are often con-
7319 0710
tained in electrical and electronic equipment. By
7319 0710
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
7319 0709
7910 4010
You can obtain information on collection points for
7910 4020
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
7319 0701
16. Disposal and recycling
7319 0704
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
7319 0702
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
7319 0705
Ask your dealer or your local council.
7319 0706
73190707
73190703
73190708
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
Publicité
