Publicité
Les langues disponibles
Les langues disponibles
2
Product Information
2
Product Information
2.1
Product description
The room thermostat is compatible for use with Buderus
heating systems in conjunction with the intelligent heating
controller Logamatic TC100.2 as well as the intelligent
individual room control SRC plus with radio module MX300.
The product is not compatible with Bosch Smart Home.
The current room temperature and room humidity can be read
on the room thermostat and the desired room temperature can
be set. If the room thermostat is connected to the Buderus app
MyMode (Logamatic TC100.2) or the app MyBuderus
(SRC plus) intelligent individual room control is available via
this. The room temperatures can be read out and set via the
apps and changed with a time program.
The Buderus room thermostat for the underfloor heating
system (hereinafter referred to as "room thermostat") is
connected via cable directly to 230 V- or 24 V actuators at the
manifold of the underfloor heating system.
Existing wired room thermostats can be replaced without
having to route new cables. A standardised flush-wall box is
required for installation. In addition to the frame supplied,
frames of existing switch series can also be retained in many
cases. You can find further information and notes on the
website of Buderus at
www.buderus.com
then search with keyword Logamatic TC100.2 or SRC plus).
2.2
Intended use
•
The room thermostat is intended exclusively for fixed
installation in flush-mounted electrical boxes with a
minimum depth of 50 mm indoors.
•
The room thermostat may only be operated with the control
element plugged in.
•
The room thermostat is suitable only for controlling
actuators at a maximum current of 1 A (corresponds to
230 W breaking capacity for the 230 V product variant or
24 W at 24 V).
•
The room thermostat is not compatible with Bosch Smart
Home.
Any use other than that described in these instructions is not in
accordance with the intended use and leads to the exclusion of
warranty and liability.
34
▶ To ensure commissioning: follow the safety instructions
▶ Observe the information in the technical data
▶ Avoid dust, moisture and solar exposure.
The control was designed for water-carrying underfloor heating
systems. Operation with other types (e.g. electric) has not
been tested.
2.3
Fig. 13
[1] Flush-mounted unit (thermostat function)
(select country and
[2] Frame
[3] Control unit
[4] Technical documentation
[5] Screws 3.2 × 15 mm
[6] Screws 3.2 × 25 mm
[7] QR code insert
B-THIW/B-THIW24 – 6721869243 (2024/08)
and instructions in these instructions as well as in the app.
( chapter 2.5).
Scope of delivery
1
2
7
Raumthermostat
SGTIN:
Key:
3
4
6
5
0010050793-002
Publicité
