10 Juice centrifuge *
a Grating container
b Filter basket
c Lid
d Pusher for juice centrifuge
11 Dicer *
a Base holder
b Catch
c Cutting grid
d Slicing disc
e Blade guard
f Cutting grid cleaner
12 Universal cutter *
a Jug with drive
b Lid
13 Blender *
a Blender jug made of Tritan
b Blade insert
c Lid
d Filling opening
e Funnel
*
depending on model
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging and
dispose of the packing materials.
■ Check that all parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Cleaning and maintenance" see
page 33
Before using the appliance for the first time
Parts and operating
controls
Important!
The bowl, lid / jug of the universal cutter and
the blender jug are not suitable for use in
the microwave.
Colour coding
The appliance has a 2 or 3-speed drive
(depending on the model). Every speed
setting is identified with a different
colour (black, grey und red). This colour
coding system can also be found on
the accessories. The accessories are
automatically connected to the right speed
setting.
Low speed, black
with drive shaft 2
For using the dicer.
Medium speed, grey
with drive shaft 1
For using the cutting discs, citrus
press and juice centrifuge.
High speed, red
without drive shaft
For using the blender and universal
cutter.
Rotary switch with illuminated
ring
X Fig. B
The rotary switch is used to select the
required speed or to switch the appliance
off. The integrated illuminated ring lights
up during operation. If there is an error in
operation, the electronic fuses trip or the
appliance has a defect, the appliance will
no longer switch on and the illuminated ring
will flash.
Caution!
Only use the rotary switch to switch the
appliance on and off. Switching off by
opening the lid will damage the appliance.
en
27