Publicité
Les langues disponibles
Les langues disponibles
High Input Voltage Current Limit
The EcoBoost MPPT will limit the solar input current as
the solar array Voc approaches the maximum input voltge
rating. The array Voc should never exceed the 120 volt
maximum input voltage - see the array voltage de-rating
graph in Appendix.
Current Limit
The array power exceeds the rating of the controller. This
alarm indicates that the EcoBoost MPPT is limiting battery
current to the maximum current rating.
RTS Open
The Remote Temperature Sensor is not connected to the
controller. Use of the RTS is recommended for proper
battery charging.
Heatsink Temperature Sensor Open / Shorted
The heatsink temperature sensor is damaged. Return the
controller to an authorized Morningstar dealer for service.
Uncalibrated
The controller was not factory calibrated. Return the
controller to an authorized Morningstar dealer for service.
4.6 Custom Settings
4.6.1 Adjusting Set-points with the Meter Display
The EcoBoost MPPT is available in metered and
non-metered versions. The metered model allows:
• Custom programming directly from the unit.
• Extensive settings adjustment and information as shown
partially in Figure 4-2 below.
30
Operation
Display Screens and Programming
Models:
EcoBoost-20M
EcoBoost-30M
EcoBoost-40M
Main Screens
Solar Current - Battery
Daily Charge Transferred -
Daily Charging Stage - Time
Battery and Load
Current - Load Current
COMMANDS
STATUS
HISTORY
See Complete History
Screens Online, or in
Manual Insert
Serial No.
SYSTEM
Firmware Version
Battery Type
Absorption Voltage
Float Voltage
CUSTOM PROGRAMMING:
EQ Voltage
To
Input Mode
See Complete
Programming
System Voltage
Programming Screens
Screens
Online or in Manual Insert
DISPLAY
SETTINGS
Backlight
See Complete
Programming Screens
Backlight Timer
Online or in Manual Insert
Contrast
Brightness
Auto Scroll
Auto Scroll Timer
Auto Return
Temp. Units
Language
Figure 4-2. Simplified Meter Map.
For metered models, see the included complete meter
map insert, also available in the EcoBoost MPPT support
documents at:
www.morningstarcorp.com
4.6.2 Meter Display Operation
4.6.2.1 Directional Key Use and Operation / Navigating
the Meter Map
The EcoBoost MPPT's meter map consists of two main
axes: The horizontal top level daily monitoring screens, and
the vertical Main Menu stacked screens. The four lighted
triangular directional control keys allow movement to reach
EcoBoost MPPT Operator's Manual
Daily Max / Min
Battery Voltages
Clear Resettable Ah
Clear Total Ah
Faults
Clear KWh
Alarms
Charge State
Load Disconnect
Load / Light State
Target Voltage
Error Log
Battery Temp.
Start Lighting Test
Battery Sense
Input Voltage
Factory Reset
Last Equalization
Graphs
Hour Meter
Reset Control
Records
31
Publicité
