Publicité
CHAPITRE 1 : DESCRIPTION DU PRODUIT
Chapitre 1 : Description du produit
1.1 Contenu de l'emballage
La boîte devrait contenir les pièces suivantes lorsque vous
l'ouvrez ; vérifiez le contenu. Si des pièces manquent ou sont
endommagées, contactez immédiatement votre revendeur.
Ecran LCD
Guide de démarrage
rapide
Package Contents
Quick Start Guide
Display x1
VGA Cable x1
Power Cord x1
Audio Cable x1
X-2402 LCD Monitor
Power Adaptor x1
Quick Start Guide x1
X-2402_Quick Guide_V010
www.agneovo.com
X-2402 Eprel registration number: 1863022
A
B
C
Control Panel
Input/Output Terminals
SDI
OUT
7
8
IN
COMPOSITE
9
IN
10
OUT
AUDIO
L
11
IN
R
USB (SERVICE)
12
DC IN
DVI
HDMI DisplayPort
VGA
AUDIO IN
RS232
13
1
2
3
4
5
6
7
8
1
2
3
4
5
6
X-2402 LCD Monitor Quick Start Guide
Thank you for choosing AG Neovo LCD display. Please read this document before installing and operating the display for the
B. Input/Output Terminals
first time. Please visit AG Neovo website: www.agneovo.com to download user manual for operation & installation details.
DC IN: Connect with the supplied power adaptor.
1
DVI: Connect DVI signals input.
8
HDMI: Connect HDMI signals input.
Safety Information
2
DisplayPort: Connect DisplayPort signals input.
9
Make sure to check that the local power supply complies with the display's power requirement indicated on the label.
3
VGA: Connect VGA signals input.
10
Mount on any other horizontal surface overhead with wall mount are not advisable. Disconnect this equipment from any
AUDIO IN: Connect audio signals input (3.5 mm Stereo Audio Jack).
4
SDI OUT: Connect SDI signals output.
11
AC (or DC) outlet before cleaning.
SDI IN: Connect SDI signals input.
5
Composite IN: Connect Composite signals input.
Composite OUT: Connect Composite signals output.
12
A. Control Panel
6
AUDIO IN: Connect audio signals input (RCA Stereo Audio Jack).
[
] AUTO: Hot Key: Auto Adjustment/Rotate
USB (SERVICE): Connect USB 2.0 for service.
13
1
• For VGA input signal source, press to perform auto adjustment.
• Press for 3 seconds to enable the Rotate function.
7
RS232: Connect RS232 input from external equipment.
• When OSD menu is ON, press to close the OSD menu or exit a submenu.
[
] LEFT: Hot Key: Audio Volume Adjustment
5
• When OSD menu is ON, press to select an option or adjust the settings.
• Press to display the volume bar. Then press the LEFT key to decrease the volume.
[
] RIGHT: Hot Key: Screen Freeze
C. Removing the Stand
• Press to activate the screen freeze function. To deactivate, press any key except for the Power
key.
1. Lay the LCD display face down on a flat even surface.
• When the volume bar appears, press to increase the volume.
2
• When OSD menu is ON, press to select and option, adjust the settings, or enter the
2. Remove the screws* securing the base stand from the LCD display.
submenu.
3. Detach the base stand.
[
] UP: Hot Key: PIP/PBP Select
• Press repeatedly to select PIP/PBP option (PIP → PBP → OFF).
*M4 x 10mm screw
• When OSD menu is ON, press to select an option or adjust the settings.
[
] DOWN: Hot Key: PICTURE MODE Select
6
• Press repeatedly to select PICTURE MODE option (Standard → CCTV → VIDEO).
• When OSD menu is ON press to select an option or adjust the settings
Trouble Shooting
Cordon d'alimentation
Câble audio
Adaptateur secteur
X-2402
Copyright © 2024 AG Neovo. All rights reserved.
Removing the Stand
EN
Câble VGA
Carte de garantie
Note :
Utilisez exclusivement l'adaptateur
d'alimentation fourni :
♦
Lite-on Technology Corporation
N° du modèle : PA-1041-81
Tension : 12V/3,33A
♦
DELTA ELECTRONICS, INC.
N° du modèle : ADP-40DD B
Tension : 12V/3,33A
Note :
♦
Les images servent
uniquement de référence.
Les éléments fournis peuvent
varier.
8
Publicité
