ENGLISH
EN
hazards)
• Unforeseen, abrupt movement, or kickback of the guide
bar (cutting hazards)"
Risk Reduction
• It has been reported that vibrations from handheld
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may inclu-
de tingling, numbness, and blanching of the fingers,
usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking
and work practices are all thought to contribute to the
development of these symptoms. There are measures
that can be taken by the operator to possibly reduce
the effects of vibration:
• Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm.
TRANSPORTATION AND STORAGE
Always lightly oil the chain when storing to prevent rust. Always empty the oil tank when storing to prevent leakage.
Stop the machine, remove the battery, and allow it to cool before storing or transporting.
Clean all foreign materials from the machine. Store the machine in a cool, dry, and well-ventilated place that is
inaccessible to children. Keep away from corrosive agents, such as garden chemicals and de-icing salts. Do not store outdoors.
Fit the guide bar cover before storing the machine or during transportation.
For transportation in vehicles, secure the machine against movement or falling to prevent injury to persons or damage
to the machine.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage. Wear ear
protectors.
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled
for hours, during which it is allowed by statute or other
local regulations. Adhere to any applicable rest times
and limit your working time to the necessary minimum
time. For your personal protection and the protection
of people nearby, suitable hearing protection must be
worn.
Please observe the following: according to the German
Machine Noise Protection Regulation from September
2002, this device may not be operated on Sundays
and Bank holidays or working days from 8pm to 7am.
Furthermore, it is forbidden to operate the machine at the
following times of day: from 7 a.m. to 9 a.m., from 1 p.m.
to 3 p.m. and from 5 p.m. to 8 p.m.
Please do also consider any local regulations concerning
noise protection!
DANGER
Warning This power tool generates an
electromagnetic field during operation. Under
certain circumstances, this field may affect active
or passive medical implants. To reduce the risk
28
• After each period of operation, exercise to increase
blood circulation.
• Take frequent work breaks. Limit the amount of expo-
sure per day.
• Protective gloves available from professional chain saw
retailers are designed specifically for chain saw use
which give protection, good grip and also reduce the
effect of handle vibration. These gloves should comply
with EN 381-7 and must be CE marked.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries may be caused, or aggravated, by
prolonged use of a tool. When using any tool for
prolonged periods, ensure you take regular breaks.
of serious or fatal injury, we recommend that
individuals with medical implants consult your
physician and the manufacturer of the medical
implant before operating the machine.
WARNING
Risk of personal injury due to chainsaw in operation.
• Keep your hands in safe distance.
Never use the machine with a damaged cover or pro-
tective device or without cover or protective devices.
• Remove the battery pack before starting any adjustment,
cleaning and maintenance work on the device. Wait until
all rotating parts have stopped and the appliance has
cooled down.
Check the work area before using the appliance.
Remove any hard objects such as stones, shards of glass,
wires, etc. that could be thrown off, knocked back or that
could otherwise cause injury or damage during appliance
operation.
Never use the appliance when the proper equipment
is not fitted.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.