Operation - Bartscher 110139 Mode D'emploi

•
Do not drill any openings or install any other objects in or on the device.
•
Do not place any heavy objects on the device.
•
Setup the device using the adjustable feet. Use a leveler if needed. All adjustable
feet must touch the ground to ensure that the door opens and closes properly.
•
The refrigerator can be
placed between tables
or alone.
Connecting the device
•
If the device has been transported in a vertical position, wait 2 hours prior to
connecting the device to a power source.
•
The socket's electrical circuit must be protected to min. 16A. Connect the device
directly to a wall socket; do not use any splitters or power strips.
•
Place the device to ensure quick access to its plug in case it is necessary to
disconnect it from its power source.

5.3 Operation

Before first use
•
Clean the device after unpacking and again before connecting it to a power source
as described in 6.2 "Cleaning".
•
Connect the device to a single, grounded socket.
•
Turn the device on using the ON/OFF switch at the front of the device. The green
control light in the switch will come on.
•
The digital display will show the factory-set temperature value.
•
During first use, before placing any food products or drinks in the refrigerator
counter, wait until the device has reached the desired temperature.
•
The device can be locked if needed. The lock is located at the front of the
device,next to the control panel.
- 26 -