Samsung HW-Q700D Mode D'emploi page 5

Using the Q-Symphony Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the
sound simultaneously through the Soundbar and the TV.
If you use the Q-Symphony function, the surround sound
played on the TV allows you to enjoy a richer, more
three-dimensional surround sound effect.
When the Soundbar is connected, "Q-Symphony" menu
appears on the TV. (The message displayed may differ
with the TV model.)
(Settings ( ) → All Settings (
Output)
Using the SpaceFit Sound
This function analyzes the user's listening space with
the Samsung TV's microphone and provide optimal
sound for the space. Sound optimization proceeds
automatically.
NOTE
• Only certain TV models support this function, and the
function is operated from the TV.
CH LEVEL
05 USING A WIRELESS
Connecting via Bluetooth
) → Sound → Sound
• Search for the Bluetooth device on your TV or mobile
SOUND
MODE
What is the difference between BT READY and BT
PAIRING?
WOOFER
TONE
• BT READY : In this mode, you can reconnect any
CH LEVEL
CONTROL
SOUND
MODE
• BT PAIRING : In this mode, you can connect a new
WOOFER
TONE
CONTROL
NOTE
• If asked for a PIN code when connecting a Bluetooth
Connecting via Wi-Fi (Wireless
Network)
• To connect a Soundbar to a mobile device via a
1. Connect your mobile device (smartphone, tablet, etc.)
2. Install and launch the SmartThings app on your
3. Follow the instructions in the app screen on the
ENG - 5
CONNECTION
Top of the Soundbar
5 sec
BT PAIRING
OR
device.
Samsung TV or mobile device that was connected
before.
device to the Soundbar.
(Press the PAIR button on the Soundbar remote
control or press and hold the
on the top of the Soundbar for more than 5 seconds
while the Soundbar is in "BT" mode.)
device, enter <0000>.
wireless network (Wi-Fi), the SmartThings app is
required.
to the Wi-Fi network the TV is connected to.
mobile device (smartphone, tablet, etc.).
mobile device to connect the Soundbar to your Wi-Fi
network.
OR
(Source) button