Télécharger Imprimer la page

LIVARNO home 424796-23-A Instructions De Montage Et Consignes De Sécurité page 4

Publicité

Les langues disponibles

Les langues disponibles

GB/IE/NI
Model grey: 424796-23-B
Dimensions: approx. 66 x 162 x 30 cm (W x H x D)
Material: Metal powder coated
Production date: 04/2023
Warranty: 3 years
5. Safety information
WARNING!
1
Risk of injury and suffocation!
If children play with the product or
the packaging, they may injure
themselves or suffocate!
-
Do not let children play with the product or the
packaging.
-
Supervise children who are close to the product.
-
Keep the product and the packaging out of the
reach of children.
WARNING!
1
Fatal danger!
Do not drill without checking the
intended positions for electrical, gas
or water lines first! There is a risk of
fatal injuries!
-
Damage to electrical, gas or water lines can
cause dangerous situations! Use appropriate
detectors to determine whether hidden lines are
situated in the work area.
WARNING!
1
Risk of injury!
Secure the product against falling
over! There is a risk of injury from jam-
ming!
-
It is absolutely necessary to fix the product to a
wall using the supplied cross-head screws
dowels
K
. The product could, for example, oth-
erwise fall over and injure children.
- Place the product on a level surface.
WARNING!
1
Danger of injury!
A defective product must not be used!
There is a risk of injury!
-
Do not use the product in the case of malfunc-
tions, damage or defects.
-
Significant danger can occur for the user in the
case of improper repairs.
6
6. Structure
1. Remove all packaging materials.
2. Check whether all parts are available and undam-
aged.
If this is not the case, notify the specified service
address.
3. Place the individual parts as shown in Fig. A.
4. Mount the product as shown in the Fig. B1 to Fig.
D.
NOTE!
-
Only tighten the Allen screws
I
have been assembled.
-
Do
I
not overtighten the Allen screws!
7. Fixing the product to the wall
WARNING!
1
Risk of injury!
Check the suitability of the wall in advance
to ensure that it is suitable for mounting
the product. There is a risk of injury!
-
The supplied cross-head screws
K
are not suitable for every wall material, e.g.
plasterboard. In this case, you should obtain the
appropriate screws and plugs from a specialist
store.
NOTE!
The product is intended for use as a superstructure
of a washing machine. Before fixing the product to
the wall behind the washing machine, proceed as
follows:
1. Turn off the washing machine.
2. Disconnect the washing machine from the power
supply.
J
and
3. Close the water supply to the washing machine.
4. Pull the washing machine forward away from the
wall.
5. Place the product against the wall at the middle
of the washing machine.
NOTE!
Make sure that the washing machine hoses and pow-
er cord are free between the front bar (B2) and rear
bar (B1), see Fig. F.
NOTE!
If you are in any doubt about how to use the washing
machine, consult a qualified person for help!
To attach the shelf to a wall, you need a drilling ma-
chine with a 8 mm drill, a Phillips screwdriver and a
hammer.
6. Fix the product as shown in Fig. E.
7. Slide the washing machine back between the
product fixed to the wall.
after all parts
Make sure that the hoses and the power cable of the
washing machine are not pinched!
8. Open the water inlet.
9. Reconnect the washing machine to the mains sup-
ply.
You can now switch the washing machine on again.
2
Risk of injury!
J
and dowels
The shelves may not be overloaded. There
is a risk of injury!
-
Only load the shelves
weight specifications, see Fig. G..
8. Cleaning and care instructions
Danger of material damage!
-
only clean with a damp cloth
-
only use a mild detergent
-
do not use any strong detergents and/or chemi-
cals
-
do not use sharp-edged tools such as spatulas or
similar, they can damage the surface
9. Disposal
Disposal of the packaging
The packaging and instructions are
made of environmentally friendly mate-
rials that you can dispose of at local re-
04
cycling points.
LDPE
Disposal of the product
The product may not be disposed of with normal
household waste. For information on disposal op-
tions for the product, please contact your local coun-
cil/municipality or your Lidl shop.
10. Warranty
Dear customer, the warranty on this product is 3
years from the purchase date. In the event of defects
NOTE!
in this product, you are entitled to exercise your stat-
utory rights against the seller of the product. These
statutory rights are not limited by our warranty de-
scribed in the following.
Warranty conditions
The warranty begins on the date of purchase. Please
keep the original receipt. This document is required
as verification of the purchase.
NOTE!
If a material or manufacturing defect arises within three
years from the purchase date of this product, the prod-
uct will be repaired or replaced, as per our choice, at
no charge to you. This warranty service requires the
submission of the purchase receipt and the defective
product within the three-year period and a short written
description of the defect and when it arose.
If the defect is covered by our warranty, the repaired
or a new product will be returned to you. The war-
CAUTION!
ranty period does not restart with the repair or re-
placement of the product.
Guarantee period and statutory claims for
defects
G
up to the maximum
The guarantee period will not be extended by the
warranty. This also applies to replaced and repaired
parts. Damage and defects which may possibly al-
ready exist upon purchase must be reported immedi-
NOTE!
ately after unpacking. After the guarantee period has
expired, required repairs shall be subject to a charge.
Scope of guarantee
The device has been carefully produced under strict
quality guidelines and conscientiously inspected pri-
or to delivery. The guarantee service applies to ma-
terial or manufacturing faults. This guarantee does
not extend to product parts, which are exposed to
normal wear and tear and can therefore be regard-
ed as wearing parts or to damage to fragile parts,
e.g. switches or which are made of glass.
This guarantee shall lapse, if the product is damages,
not used properly or maintained properly. For proper
use of the product, all of the instructions in the operating
instructions must be precisely complied with. Purpos-
es and actions, which are dissuaded from or warned
about in the operating instructions must be avoided.
The product is only intended for private and not
commercial use. In the case of abusive and improper
handling, use of force and with interventions, which
are not performed by our authorised service branch,
the guarantee shall lapse.
GB/IE/NI
7

Publicité

loading

Ce manuel est également adapté pour:

424796-23-b