Publicité
Les langues disponibles
Les langues disponibles
LIST OF MATERIALS
Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
Supplied Part
Hood assembly with blower and
LED lamps already installed
5x45 mm
4x8 mm
Tools/Materials required
• Level
• Drill
• 1¼" (3 cm) drill bit
• ⅛" (3 mm) drill bit
• Pencil
• Wire stripper or knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
• Phillips screwdriver
I WARNING
Remove the protective film covering the product before put-
ting into operation.
Pieces
1
4
10" round air transition
10
Parts no supplied
Parts needed
•
Home power supply cable
•
1 - ½" (12.7 mm) UL listed or CSA approved strain relief
•
3 UL listed wire connectors
•
1 wall or roof cap
•
Metal vent system
Optional accessories and consumable parts
KIT
in Line Blower
1200 Kit
External Blower
1200 Kit
Grease Filters Re-
placement Kit
Supplied Part
Side spacers
# Part
ETR634SS
KIT0154387
KIT0153054
Pieces
2
1
EAR634SS
KIT0154387
KIT0153054
GF09GA
5
Publicité
