Télécharger Imprimer la page

Pioneer BDR-WX01DMU Manuel De L'utilisateur page 13

Graveur de bd/dvd/cd externe pour l'archivage usb 3.2 gen1/2.0

Publicité

Les langues disponibles

Les langues disponibles

Handling discs
Handle the recording surface of the disc so that it is free from scratches, fingerprints,
dirt, dust, water, oil, salt, and other contaminants. If there are any scratches,
fingerprints, dirt, dust, water, oil, salt, or other contaminants on the disc, refer to the
following cleaning method and remove the contaminants from the disc before use.
Disc removal
While pressing the circular central part of the case, use your other
hand to hold the edges of the disc and lift it up to remove it from its
case.
Disc handling
Hold the disc so that you do not touch its recording surface.
• Lightly rest your finger in the center hole of the disc. Inserting
your finger into the hole excessively may result in it getting
stuck.
Cleaning
• Avoid touching the recording surface of the disc as much as possible.
• Before wiping, try removing contamination with a camera-use air blower or similar
device.
• When wiping off dirt, dust, or similar from the recording surface of the disc, use a
soft cloth that does not produce lint, such as a microfiber cloth for glasses, or a
commercially available cleaning cloth.
• When wiping, wipe gently from the inside to the outside
edge in order to prevent damage to the disc. Wiping with a
circular motion may accidentally damage the disc, resulting
in data loss.
• If contamination is difficult to remove, dampen the cloth
above with water or ethanol and wipe gently.
• When using a commercially available cleaning liquid, ensure
that you check the usage instructions.
• Do not use solvents such as benzine, thinners, or record cleaners, or anti-static
agents.
• Ensure that there is no water or ethanol residue left on the disc.
• If there is any contamination, this will result in an error during further recording.
Writing on the label surface and affixing labels
• Use a felt-tip pen to write on the label surface. Do not use writing implements that
have a hard tip. When writing on the label surface, refer to "Disc handling" and
Cautions in Usage
Correct
Wrong
×
Correct
Center to outer edge
Wrong
×
Circular motion
13
BDR-WX01DMU
En

Publicité

loading