Pioneer BDR-WX01DMU Manuel De L'utilisateur page 10

IMPORTANT SAFETY INSTRUCTIONS
• When moving the device, ensure that the power plug is first unplugged from the
outlet, and that the USB cable is removed. Failure to do so may lead to damage to
the cord, which can result in fire or electric shock.
• Do not touch the power plug if lightning occurs. Doing so may lead to electric shock.
• Keep the AC adapter and power cord away from water droplets.
• Do not remove the cover of the device or AC adapter or modify the device or
adapter. The interior of the device contains high-voltage parts, and opening it may
lead to fire or electric shock. Ask your dealer to carry out any internal inspections,
maintenance, and repairs. This device is a precision instrument, so refer this
product to an authorized dealer or service center if disassembly is required.
• Due to the specifications of the product, all displays turn off when operation is
stopped, thus the product may appear the same as when the power plug has been
removed from the outlet. However, the power supply has not stopped providing
power. To disconnect the product from the power supply completely, you must
remove the power plug (breaker) from the outlet. Place the product close to an
outlet, where the power plug (breaker) can be reached easily. Leaving the power
plug plugged in for extended periods of time may lead to fire.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• When connected to the AC adapter, do not put anything on or over the device or AC
adapter.
• Do not overload wall outlets and extension cords. Doing so may result in fire or
electric shock.
Ensure you abide by the following precautions, as failure to do so may lead to
fire or electric shock.
• Connect cables to the device only after checking that the cables have not
deteriorated and are not damaged.
• Do not disassemble or modify the device. Do not allow metal, flammable objects,
chemicals, water or other foreign matter to enter the device.
10
BDR-WX01DMU En